Tank And Jacket: 15 gallon stainless steel pressurized tank. Tank has built-in
carrying handles, air intake fitting, pressure gauge and pressure relief valve.
Tank has approximately 10 gallons (37.9 litters) usable capacity.
Heating Element: Heating element is made of silicone rubber and is attached to
the tank with a spring latch. The water temperature inside of the tank is
regulated by an onboard thermostat set to 65°F. The total amp draw is 3.33A and
delivers 400W of power, which allows the unit to operate to temperatures as low
Ground Fault Plug: Unit comes standard with a 15A Ground Fault Circuit Interrupter
(GFCI) with manual reset connected to a 9 foot long cord.
Eyewash Unit: Two GS –Plus spray heads, each with a “flip top” dust cover,
internal flow control and filter. A 1/2” IPS chrome plated brass stay-open
three way self draining ball valve with stainless steel flag handle. Pressure
regulator controls eyewash flow to 0.65 GPM for 15 minutes.
Drench Hose: Single GS-Plus spray head with “flip top” dust cover, internal
flow control and filter. Chrome plated brass squeeze valve with stainless steel
lever handle and 6 foot reinforced PVC hose.
Operation: To operate unit, fill with clean potable water and add
bacteriostatic additive (supplied with unit). Additive protects against growth
of bacteria, fungus, algae and acanthamoeba inside unit. After filling with
water, pressurize unit to 80 PSI air pressure. If necessary, adjust pressure
regulator to achieve maximum flow for fifteen minutes. Unit should be inspected
regularly and water in unit should be changed at least once every six months.
Filling instructions included.
Weight: 41.5 lbs. empty, 124.8 lbs. filled.
Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory.
Unit is depressurized and emptied prior to shipping. Some assembly required in
Sign: ANSI compliant identification sign permanently affixed to