Availability : Usually Ships in 2-3 Business Days
Right hand mounting shown in the picture above. Deck mounted eye/face wash installs next to your sink and swings out of the way when not in use. Never lose dust covers again! Spray head assembly has two Fine Spray outlet heads with "flip-top" dust covers mounted on chrome plated brass supply arms. Activated by a 1/2" IPS chrome plated brass stay-open ball valve with cast aluminum flag handle. Unit meets ANSI Z358.1 standard as primary eye/face wash. Fully factory assembled and water tested. Complete with ANSI compliant identification sign.
APPLICATION: Eye/face wash for mounting on counter next to sink. Spray heads swivel 90 degrees from storage to operational position. Water flow is activated by flag handle.
SPRAY HEAD ASSEMBLY: Two FS-Plus spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.
VALVE: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals.
MOUNTING: Unit is mounted on left side of sink. Furnished with locknut and washer for securing unit to countertop. Provide 7/8" diameter hole in counter.
CONSTRUCTION: Polished chrome plated brass.
SUPPLY: 1/2" NPT male inlet.
SIGN: ANSI-compliant identification sign.
QUALITY ASSURANCE: Unit is completely assembled and water tested prior to shipment. br>
APPLICATION: Eye/face wash for mounting on counter next to sink. Spray heads swivel 90 degrees from storage to operational position. Water flow is activated by flag handle.
SPRAY HEAD ASSEMBLY: Two FS-Plus spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.
VALVE: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals.
MOUNTING: Unit is mounted on left side of sink. Furnished with locknut and washer for securing unit to countertop. Provide 7/8" diameter hole in counter.
CONSTRUCTION: Polished chrome plated brass.
SUPPLY: 1/2" NPT male inlet.
SIGN: ANSI-compliant identification sign.
QUALITY ASSURANCE: Unit is completely assembled and water tested prior to shipment. br>
Item | Deck Mounted Eyewash |
Sprayhead | Eye/Facewash |
Mounting | Counter Mount |
Operation | Push Handle |
WARNING:Â California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.