GFR3500 Heated Safety Station with Eyewash, Stainless Steel Pipe/Fittings, Top Inlet, Rated for Class I, Division 2 Environment. Fittings, Top Inlet, Rated for Class I, Division 2 Environment.
Application: Electric heat-traced stations prevent freezing even in extreme conditions. Thermostat regulated units are heated by self-limiting heat-tracing cable wrapped around internal pipe. Units are intended for cold weather use down to -40F.
Heating Cable: Self-regulated with external termination guards. Thermostat activates when internal piping temperature falls below 75F. FM, UL, and CSA approved for Class I, Division 2, Groups B, C, and D.
Electrical System: Unit is fully wired at factory. Junction box and components rated for Class I, Division 2, Groups B, C, and D. Requires 120 VAC single phase power supply.
Jacket/Insulation: UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections secured with removable stainless steel screws for easy maintenance.
Shower Head: 10" diameter stainless steel with 20 GPM flow control.
Shower Valve: 1" IPS chrome-plated brass stay-open ball valve. US-made with brass ball and Teflon seals. Includes stainless steel actuating arm and 29" stainless steel pull rod.
Spray Head Assembly: Freeze-resistant with float-off dust covers and internal flow control
Eyewash Valve: 1/2" IPS chrome-plated brass three-way self-draining stay-open ball valve. US-made with brass ball and Teflon seals. Includes 1/2" NPT port to drain water from spray heads after use.
Pipe and Fittings: Schedule 40 Type 304 stainless steel.
Supply: 1-1/4" NPT female top inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Factory tested prior to shipment. Ships fully assembled and crated.
Application: Electric heat-traced stations prevent freezing even in extreme conditions. Thermostat regulated units are heated by self-limiting heat-tracing cable wrapped around internal pipe. Units are intended for cold weather use down to -40F.
Heating Cable: Self-regulated with external termination guards. Thermostat activates when internal piping temperature falls below 75F. FM, UL, and CSA approved for Class I, Division 2, Groups B, C, and D.
Electrical System: Unit is fully wired at factory. Junction box and components rated for Class I, Division 2, Groups B, C, and D. Requires 120 VAC single phase power supply.
Jacket/Insulation: UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections secured with removable stainless steel screws for easy maintenance.
Shower Head: 10" diameter stainless steel with 20 GPM flow control.
Shower Valve: 1" IPS chrome-plated brass stay-open ball valve. US-made with brass ball and Teflon seals. Includes stainless steel actuating arm and 29" stainless steel pull rod.
Spray Head Assembly: Freeze-resistant with float-off dust covers and internal flow control
Eyewash Valve: 1/2" IPS chrome-plated brass three-way self-draining stay-open ball valve. US-made with brass ball and Teflon seals. Includes 1/2" NPT port to drain water from spray heads after use.
Pipe and Fittings: Schedule 40 Type 304 stainless steel.
Supply: 1-1/4" NPT female top inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Factory tested prior to shipment. Ships fully assembled and crated.
| Item | Combination Safety Shower Eyewash Stations |
| Sprayhead | Eyewash |
| Mounting | Floor Mount |
| Eyewash Bowl Material | No Bowl |
| Operation | Push Handle |
| Shower Operation | Pull Down Arm |
| Shower Head Material | Stainless Steel |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.